- تحمل تجار الجملة
- FAG محامل SKF محامل وحدات SKF تحمل الملحقات
العربية
English
Deutsch
Ελληνικά
Español
Français
Bahasa Indonesia
Italiano
日本語
Português
Русский язык
Shqip
Svenska
ไทย
Türkçe
Українська
- عنوان258 بيرينغ وولزاليرس سينتر هيل، سنغافورة 628925
- عنوان المصنع258 بيرينغ وولزاليرس سينتر هيل، سنغافورة 628925
- وقت العمل9: 00-18: 00 (بتوقيت بكين)
- هاتف العمل(وقت العمل)+6531591338
- هاتف العمل(غير وقت العمل)+6531591338
- الفاكس+6531591338
Four Row Tapered Roller Bearings NTN
إرسالFour-row tapered roller bearings are used successfully worldwide for rolling mill bearing arrangements where rolling speeds are slow to moderate. Because of their design they are able to take up those axial loads which occur in such applications in addition to radial loads and generally no separate thrust bearings are required in such arrangements. This means that the roll necks can be relatively short and the chocks at both sides of the roll can have the same design .
Four-row tapered roller bearings, because of their design, must be installed as complete bearings in the chocks. To enable quick roll changes to be made they must therefore have a loose fit on the roll necks. Loose fits have the disadvantage that the inner rings wander on their seats under the prevailing load conditions causing wear to the seats which normally have a lower hardness than the rings. To alleviate the effects of a loose fit to some extent, i.e. to reduce wear, bearings have a helical groove in the bore and/or lubrication grooves in the side faces of the inner rings . These grooves enable lubricant to be supplied to the contact surfaces of the inner ring and seat. Additionally, the grease-filled grooves can absorb the wear particles.
Produces an extensive range of four-row tapered roller bearings which covers not only the conventional designs with intermediate rings between the outer and/or inner rings , but also a new design with modified rings which integrate the intermediate rings .
Our brands include NSK, TIMKEN, KOYO, NTN, IKO and so forth.
| Bearing Number | Bore Dia | Outer DIa | Width | Size |
|---|