- تحمل تجار الجملة
- FAG محامل SKF محامل وحدات SKF تحمل الملحقات
العربية
English
Deutsch
Ελληνικά
Español
Français
Bahasa Indonesia
Italiano
日本語
Português
Русский язык
Shqip
Svenska
ไทย
Türkçe
Українська
- عنوان258 بيرينغ وولزاليرس سينتر هيل، سنغافورة 628925
- عنوان المصنع258 بيرينغ وولزاليرس سينتر هيل، سنغافورة 628925
- وقت العمل9: 00-18: 00 (بتوقيت بكين)
- هاتف العمل(وقت العمل)+6531591338
- هاتف العمل(غير وقت العمل)+6531591338
- الفاكس+6531591338
SPHERICAL THRUST ROLLER BEARINGS NSK
إرسالThrust Cylindrical Roller Bearings
These are thrust bearings containing cylindrical rollers. They can sustain only axial loads, but they are suitable for heavy loads and have high axial rigidity.
The cages are machined brass.
Thrust Spherical Roller Bearings
These are thrust bearings containing convex rollers. They have a self-aligning capability and are free of any influence of mounting error or shaft deflection. Besides the original type, the E type with pressed cages for high load capacity is also available. Their bearing numbers are suffixed by E.
For horizontal shaft or high speed application, machined brass cages are recommended. For details, contact NSK. Since there are several places where lubrication is difficult, such as the area between the roller heads and inner ring rib, the sliding surfaces between cage and guide sleeve, etc., oil lubrication should be used even at low speed. The cages in the original type are machined brass.
| Bearing Number | Bore Dia | Outer DIa | Width | Size |
|---|